MPS Medical
Pharm/
Pump III
Operator Manual V5.01
15
Again the Up/Down Left Right keys can be used to edit the concentration. Mg/ml is
already installed to save time, however this can be edited out. Please note CONC:
cannot be edited out
– it is fixed.
4.4
Setting the Drug Name
(Named Drug and custom label only)
Enter the
SETUP
menu and select the Named Syringe or custom label dispense type as
indicated in 4.1 above. Pressing the
NEXT
soft key will display the following setup
menu screen:
The top line shows the currently selected drug name. In this example no name has
been previously selected for this memory, so the default “Unspecified Name” drug name
is displayed. Pressing the
UP/DOWN
arrow keys on the numeric keypad will cycle
through the available list of drug names. Refer to Appendix 3 for a list of drug names
included.
Note: Holding down the
UP/DOWN
arrow keys for a moment will activate the auto
repeat function so the desired drug name can be selected more quickly.
4.5
Setting Drug Lot Number
(Named Drug only)
Enter the
SETUP
menu and select the Named Syringe dispense type as indicated in 4.1
above. Pressing the
NEXT
soft key twice will display the following setup menu screen:
The top line shows the lot number from the last time this memory was used. In this
example no lot number has previously been used for this memory, so the default
‘0000000000’ lot number is displayed.
Unspecified Name
Use
NEXT
QUIT
Lot No.
0000000000
INC
NEXT
QUIT