MPS EVKT-5416, User Manual, Page: 4 / 16

User Guide
MP5416 Evaluation Kit (EVKT-5416)
MP5416 Evaluation Kit User Guide Rev 1.31 MonolithicPower.com
3
10/14/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
The MP5416 is highly customizable. Users can program the PMIC via the MPS I2C GUI and one-time
programming (OTP).
⚠️
All changes made in I2C mode will NOT be retained once the EVB is powered down.
⚠️
Information written in OTP mode CANNOT be changed.
Features adjustable under each method are outlined below.
I2C OTP

Current limit of buck 2 and 4

Slew rate (DVS Slew rate)

Discharge (DISCHG)

System enable (SYSEN)

Software reset (SFRST)

Read status and ID2 registers

Current limit of buck 1 and 3

Switching frequency

LDORTC output voltage

Initial on/off

Push-button timer

Mode

Power-on delay (RSTO delay)

Automatic turn-on

I2C slave address

Soft start time

Manual reset timer

Phase shift delay

Shorter key on/off

Ramp cap

Suffix number

OTP version
Kit Specifications
Features Specification
Supply for Board 3.5V - 5V
Operating Input Voltage 2.8V - 5.5V
Operating Systems Supported Windows XP, 7 or later
System Requirements Minimum 22.2 MB free
GUI Software 3 Register Controls: Buck, LDO, System
EVB Size (L x W) 9.4 cm x 8.6 cm