IMPORTANT SAFETY INSTRUCTIONS
3
Avoid high temperatures
If you use the TV in a hot environment, the heat could damage the LED TV and its other parts, or cause
it to overheat.
●
Do not place the LED TV, the remote control and other parts in direct sunlight or near a hot object
such as a heater or radiator.
●
Do not put the LED TV in a place where the temperature often rises and falls.
Avoid oil
Do not use the LED TV in a place where oil is used, as oily dust may get into the LED TV and damage it.
Protect the power cord
Not connecting the power cord correctly could lead to a fire or electric shock.
●
Do not connect too many appliances to the same mains socket, as this could cause a fire or electric
shock hazard.
●
Make sure you only connect the LED TV to a properly fitted mains socket.
●
Place your LED TV near a mains socket which you can get to easily if you need to disconnect it.
●
Check that the part of the power cord that connects to the LED TV is clean (with no dust) before you
plug it in. Also use a soft and dry cloth to clean the power plug.
●
Run the power cord away from places where it could be stepped on or 'pinched' by items placed on
or against it. Do not put anything heavy on top of the power cord.
●
Do not touch the power cord with wet hands.
●
Pull out the power cord by the plug, not by the cord itself.
●
Make sure the plug is firmly inserted into the mains socket. Avoid using loose sockets or sockets with
faulty connections.
●
Try not to pinch, bend, or twist the cable, as this may expose or snap the lines inside it and cause it to
fail or lead to a fire or electric shock hazard.
●
For your own safety, do not touch any part of the LED TV, power cord or aerial lead during lightning
storms.
●
Do not tamper with the power cord in any way.
●
Unplug the LED TV during lightning storms or if you will not be using it for an extended period of time.
●
Switch off and disconnect the power plug before you make or change connections.
Handling and cleaning the screen
To prevent the screen from being damaged, follow the points mentioned below. Do not push on the
screen, scratch it with hard objects, or throw things at it.
●
Unplug the power cord before you clean the screen.
●
Do not touch the screen if the LED TV has been switched on for a long period, as it may have become
hot.
●
We recommend touching the screen as little as possible.
●
To remove dust from the screen, wipe it gently with a clean, soft, dry cloth.
●
Do not use any type of abrasive pad, alkaline or acid cleaner or strong solvent such as alcohol,
thinner or benzene, as this may damage the surface of the screen.
Cleaning the cabinet
●
Unplug the power cord before you clean the cabinet.
●
Clean the cabinet with a soft cloth.
●
Do not use cleaning products which contain solvents such as alcohol, thinner, benzene or insecticide,
or materials such as rubber or vinyl.
Carrying and moving the LED TV
●
Always carry the LED TV with two people holding it with two hands, one hand on each side of the LED
TV. If you carry the unit any other way, you may drop it damaging the TV and possibly be seriously
injured.
●
When you move the LED TV, never carry it by holding onto the speakers. The speakers may break
free and the LED TV may fall. This could cause serious damage to the TV and may seriously injure
you.
Servicing
Do not open the cabinet or remove the cover from the back of the LED TV. If any of the following things
happen, unplug the power cord from the mains socket and contact a qualified engineer.
The power cord or plug is damaged.
The screen is damaged.
