background image

 

5

BATTERY INSTALLATION 

 
When the bars in the battery indicator (in the display) become low (see figure 1), replace the 
battery as follows. 

 

 

1.  Open the battery door by sliding it towards the bottom of the unit as shown in  

figure 2. 

2.  Flip the battery plate upward and insert one (1) “AAA” cell battery (included) as 

shown in figure 3. Alkaline batteries are recommended for the longest playing time. 

3.  Flip the battery plate to its original position as shown in figure 4 and slide the battery 

door back on. 

 

 

Figure2 

 

Figure 3 

 

Figure 4 

 
 

 
 

BATTERY PRECAUTIONS 

Follow these precautions when using batteries in this device: 
1.  Use only the size and type of batteries specified. 
2.  Be sure to follow the correct polarity when installing the battery as indicated. Reversed 

batteries may cause damage to the device. 

3.  If the device is not to be used for a long period of time, remove the battery to prevent 

damage or injury from possible battery leakage. 

4. Do not try to recharge batteries not intended to be recharged; they can overheat and 

rupture. (Follow battery manufacturer’s directions.) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for MP-F56




























Reviews: