MPM MZE-17, Manual

Page: 15 / 40

1.
Make sure that the appliance is unplugged from the mains.
2.
Set the steam output control slider
1
to “NO STEAM” .
3.
Fill the iron water tank to MAX.
4.
Plug the power cord to a PE mains outlet.
5.
Set the maximum temperature.
6.
When the red indicator goes off and the green one turns on, unplug the iron from the power
outlet.
7.
Hold the iron with its sole down over a sink, then press the SELF CLEAN button
2
and gently
shake the appliance. The iron sole will blow steam and hot water. This will flush the dirt and
scale flakes.
8.
When the water tank is empty, release the SELF CLEAN button
2
. Repeat this if there still is
much dirt inside the iron.
ACTIVE ANTI CALC FUNCTION
The anti-calc cartridge prevents clogging of the steam nozzles with scale. The cartridge re-
mains active and does not need to be replaced.
Do not use any descaling agents with the appliance, otherwise the anti-calc cartridge can be
damaged.
STORAGE
1.
Set the steam output control slider to “NO STEAM” and unplug the power cord.
2.
Empty the water tank
8
.
3.
Wait until the iron cools down. Wind the power cord around the iron.
4.
Stow the empty iron standing up on a solid, firm surface.
TECHNICAL SPECIFICATIONS
See the product’s nameplate for technical ratings.
Power cord length:
2.5 m
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
Poland
This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose the
waste electrical and electronic equipment in a safe way, contact your retailer or local Department
of Environmental Protection. Do not dispose the device with other municipal waste.
15
GB