MPM MZE-10, User Manual

Page: 18 / 44

HOW TO USE
STEAM IRONING
1.
Check if there is enough water in the water tank
8
.
2.
Select the recommended temperature (see: „Preparing the Iron for Use”).
3.
Select appropriate steam setting using the steam regulator
1
.
NOTE! The iron will start producing steam when it reaches the selected temperature.
„NO STEAM” IRONING
1.
Turn the steam regulator 1 to the „no steam” position .
2.
Set the recommended ironing temperature (see: “Preparing the Iron for Use”).
SPRAY FUNCTION
You can use this function to remove „stubborn” creases.
1.
Check if there is enough water in the water tank
8
.
2.
Press the spray button 3 several times to moisten the item you are about to iron.
SURGE-OF-STEAM FUNCTION
This function 4 can be used in vertical and horizontal position. It is useful if you want
to remove creases from hanging clothes, curtains, etc.
NOTE! Do not direct the stream of steam at people!
ANTI DRIP FUNCTION
Your iron has the anti-drip function: it will stop producing steam automatically when the
temperature is too low to prevent water dripping from the soleplate.
AFTER USE
1.
Remove the supply cord plug
6
from the socket.
2.
Empty the water tank 8 after steam ironing.
3.
Put the iron in a safe place, in the upright position, and allow it to cool down.
CLEANING AND MAINTENANCE
1.
Remove lime scale and other sediments from the soleplate 9 using a damp cloth and
a cleaning liquid that does not contain abrasive agents.
NOTE! To avoid scratching the soleplate, do not place the iron near any metal objects. Never use scrapers, vinegar or
any chemical agents to clean the soleplate.
2.
Wipe the upper part of the iron with a damp cloth.
3.
Rinse the tank with water regularly 8 , and empty it after rinsing.
18
GB