MPM MWA-05, User Manual, Page: 12 / 36

experience and knowledge, unless they have been given supervision or instruc-
tion concerning use of the appliance in a safe way and if they understand the
hazards involved. Cleaning and user maintenance shall not be carried out by
children without supervision.

Store the appliance out of reach of children under 8 years of age.
 Children should be supervised to ensure that they do not play with the appliance.
DESCRIPTION OF THE APPLIANCE
The scale has been designed for precise measurement of the increase or decrease in body
weight, the percentage of body fat, bone tissue and water content in the body, as well as BMI
and BMR indices in a given period. If used under normal conditions, the appliance should
serve for many years.
It is intended for individuals aged between 6-100 years, with a height between 80-220cm
(2’8”-7’2” ).
The scale ensures correct measurement only at ambient temperatures between 0-40°C
(32°-F104°F) and at a relative humidity below 85%.
The body fat measurement function is not intended for professional athletes, body-builders,
pregnant women. Pregnant women should use the “weigh measurement” function.
The scale has been designed for domestic use, it has not been officially adjusted and is not
suitable for medical or commercial use.
NOTE! The scale may not be used by individuals with cardiac pacemakers or other medical implants with elec-
tronic components. In case of doubts regarding your health condition, please consult your doctor.
The appliance calculates the body composition using bioimpedance (BIA) and is based on the
measurement of the ratio of body weight to the mass of water contained in the body, taking
into account other biological data (body weight, age and sex).
Safe, low-level electric signals pass through the body via the contact plates situated on the
glass plate of the appliance. The signal easily flows through the fluids in the muscles and other
body tissues, when passing through the fatty tissue it encounters resistance as it contains
small amounts of fluids. This resistance is called impedance.
The scale is powered by two 1,5 V (AAA) batteries. The battery is located in the battery com-
partment. The battery compartment is located on the bottom of the appliance. When replac-
ing the battery check if it is properly fitted and observe proper polarity.
After inserting the batteries, you can change the factory settings for the units of measure, ie.
kg and cm and lb/st:lb/ft:in, using the keys (6) or (8) .
The function keys of the scale are located on the top edge of the scale under the glass plate.
After setting the appropriate units, if weighing is not performed, the scale will switch off au-
tomatically after approx. 6 seconds.
12
GB