MPM MPM-40-CBM-10Y, Operating Manual, Page: 19 / 24

19
EN
5.3. USING THE COOLER IN AC MODE
h
Place the cooler on a firm base.
h Connect the 220-240 V connection cable to the AC mains.
h
Push the switch on the control panel to HOT or COLD to switch the cooler on.
h
When the cooler is connected to a 220-240 V AC mains supply, it can be used in two
different operating modes:
ECO mode (for AC 230V supply): the cooler consumes less energy
MAX mode: the cooler reaches maximum cooling capacity
3 The indicators on the control panel show you the operating mode:
Operating display Operating mode
Red Heating
Green Cooling
3
The cooler starts cooling/heating the interior.
To switch off the cooler, push the switch on the control panel from HOT or COLD to the OFF
position.
ATTENTION! Do not switch directly from one operating mode into the other. If you
would like to change the operating mode, turn the appliance off. Wait about 30
minutes before you switch it to the other operating mode.
5.4. CONNECTING TO THE CIGARETTE LIGHTER
NOTE
If you connect the cooler to the cigarette lighter, remember that in most vehicles
the ignition must be turned on to supply it with power.
ATTENTION! Do not connect both power cords at the same time - the refrigerator can
be connected only to one power source.