MPM MCZ-54, User Manual

Page: 9 / 24

9
GB
BEFORE USE
1.
The kettle should be placed upright of flat, stable and dry surfaces.
2.
Prior to the first use, fill the kettle with water to max level, boil it, then empty and rinse
with fresh water. Repeat it few times to remove production dust, etc.
3.
The kettle turns off automatically when the water has boiled. In order to turn it off
earlier you can use the Off button (4).
4.
After water has been boiled or the kettle has been switched off, wait several seconds
before switching it on again.
5.
The empty kettle will be automatically turned off by its overheating protection system.
In such case the kettle should be allowed to cool for 15 minutes before its refilling.
HOW TO USE THE KETTLE
1.
Open the kettle’s cover, pour water to a desired level (however, not less than 0,1 l and
do not exceed the level of 0,5 l).
2.
Close the lid (2).
3.
Connect the kettle to an electrical outlet and turn it on using the switch (3). When the
water starts to boil, the indicator lamp (6) switches off and the kettle turns off auto-
matically.
IMPORTANT NOTE! Do not ever open the kettle lid in course of water boiling.
CLEANING AND MAINTENANCE
NOTE! The kettle should be regularly descaled in accordance with the instructions included below. Al-
ways unplug cord of power base before cleaning and allow the jar to cool down.
1.
Fill the jar with water mixed with vinegar or lemon juice (citric acid) or special descaling
agent available in the shops selling the household equipment.
2.
Let the mixture soak in the kettle for an hour and boil the water thereafter.
3.
Empty the kettle and rinse the inside thoroughly with cold.
4.
Repeat this action up to three times, if necessary.
5.
In order to eliminate the smell of vinegar, boil and remove water several times.
6.
Wipe the jar inside and outside with a cloth.
7.
Failure to descale your kettle may result in its damage.
CAUTION! Do not use any wire brush or other abrasive objects. Do not use any acidic or abrasive deter-
gents.