MPM MBL-20, User Manual

Page: 10 / 28

10
GB
DESCRIPTION OF THE APPLIANCE
1.
Power ON/OFF button
2.
Blender housing
3.
Stainless steel knife
4.
Bottle mounting base
5.
Blender holder
6.
Blender bottle (600 ml)
7.
Second blender bottle (600ml)
8.
Bottle cap
9.
Closable opening
10.
Holder
11.
Non-slip feet
INSTALLATION OF THE BLENDER
BOTTLE
1.
Select a bottle (6) or (7), then rotate
it so that the hole for screwing in the
base is present on the top side.
2.
Put the bottle base ring (4) with the
knife (3) on the bottle (6) or (7), then
screw it up to a stop, ensuring that the
thread is correctly aligned.
In case of uninstallation of the blender
knife, act in a reverse order.
WARNING! The device knife is sharp. Handle
with care.
USING BLENDER
The appliance is equipped with two replaceable bottles of 600ml each (6), (7) for preparing
and storing fresh fruit and vegetable cocktails, as well as milk and protein cocktails. Bottles
are made of top quality BPA free plastic. They have airtight caps (8) with a closable hole for
drinking (9) and a handle for carrying (10).
1.
Place the blender housing (2) on a dry, hard and even surface.
2.
Before use check the sealing rings in the cap (8) and the bottle base, (4) and make sure they
are correctly installed.
3.
Cut the products into smaller parts to make mixing easier.
4.
Put the ingredients into the bottle and tighten the mounting base with knives (4) paying at-
tention to the proper adjustment of the thread.
ATTENTION! Do not fill the bottle above the mark of (max). If the ingredients will produce a lot of foam, do not
put too much into the bottle. Suitably reduce the capacity.
1
3
6
8
10
9
4
5
2
7
8
9
10
11