MPM MBL-10, User Manual

Page: 10 / 24

10
GB
DESCRIPTION OF THE DEVICE
1.
Body of the blender
2.
Stainless steel chopping attachment,
which can be used at high
temperatures
3.
Locking keys
(on both sides)
4.
On/Off switch
5.
TURBO function
6.
Power control knob
7.
Operation light
8.
Hanging loop
ASSEMBLY AND USE OF THE BLENDER
ATTENTION! Before using the device for the first time, wash the
chopping attachment.
Attach the chopping attachment 2 to the body of the
blender
1
. The chopping attachment locks itself when
placed on the body of the blender 1 . To remove the
chopping attachment
2
, press the locking keys
3
and,
while keeping the bottom of the shopping device, remove it. It should be mentioned that
the chopping attachment disconnected by a fast motion does not damage the device or its
components.
POWER CONTROL KNOB
The blender is fitted with the power control knob 6 . With this function, you can adjust the
speed of the blender engine according to your needs. Turning the knob
6
clockwise, the
power of the engine increases, while turning the knob 6 counter-clockwise, it decreases.
TURBO FUNCTION
TURBO function
5
is used when high-speed operation for a short period of time is required.
The device runs on the impulse, i.e. it starts working at the moment when button 5 is pressed.
When the device operates in its power mode, TURBO is equal to the maximum speed, which is
set by the power control knob
6 .
The blender runs at its maximum speed when the TURBO button is pressed.
CLEANING AND MAINTENANCE
1.
Before cleaning the device or its parts, pull the plug from the power outlet.
2.
Before and after each use, disassemble the parts of the device, thoroughly wash them with
warm water and detergent, then thoroughly rinse and dry.
3.
Do not wash the device parts in a dishwasher!
3
5
6
8
2
1
4
7