2 SPECIFICATION
This chapter provides an overview of the PIP20 product and its features
2.1 ELECTRICAL
2.1.1 PROCESSOR
•
Low voltage 1.66 GHz Intel Core Duo processor L2400 with 2 MByte Level2 Cache in 65 nm technology
•
Or Low voltage 1.5 GHz Intel Core Duo processor L7400 with 4 MByte Level2 Cache in 65 nm technology
•
Enhanced Intel
SpeedStep
technology
•
Supports catastrophic thermal protection
2.1.2 CHIPSET
•
Intel 945GM & ICH7-MDH
•
667 MHz source-synchronous Front Side Bus
•
Supports ACPI-defined power states S1 (Stop Grant), S3 (Suspend to RAM), S4 (Suspend to Disk), S5 (Soft
Off)
•
Intel DMI interface and PCI-Express bus for high data bandwidth
2.1.3 BIOS ROM
•
1 MByte Firmware Hub
•
Easy BIOS update
•
BIOS source owned by MPL AG
2.1.4 MEMORY
•
Dual channel DDR2-667 (2x PC2-5300) memory
•
Up to 1 GByte on board
•
200 pin SO-DIMM slot supports up to 2 GByte memory
2.1.5 RTC
•
Backed with field changeable on board battery
2.1.6 PC/104-
PLUS
INTERFACE
•
8/16 bit memory and I/O PC/104 interface
•
PC/104 DMA and ISA Master not supported
•
32 bit PC/104-
PLUS
interface
•
Up to 4 PC/104-
PLUS
bus masters (PC/104-PLUS Spec. Rev. 2.2)
2.1.7 GRAPHICS
•
Intel Generation 3.5 Integrated Graphics Engine and Intel Graphics Media Accelerator 950 (GMA950)
•
250 MHz graphics core with 2D and 3D engine and up to 224 MByte Graphics Memory
•
Dual Pipe independent display functionality
•
400 MHz, 24 bit RAMDAC
•
LVDS port on 1 mm header supports up to 1600 x 1200 (UXGA)
•
Digital Video Interface on DVI-I connector supports up to 1600 x 1200 and 1920 x 1200 (reduced blanking)
•
Analog Video Interface on DVI-I connector supports up to 2048 x 1536 (QXGA) @ 75 Hz
•
DVI-I connector is ESD protected
2.1.8 USB
•
6 Ports with 1.5 / 12 / 480 MBit/s (4 external, 2 internal)
•
Supports USB keyboards and mice as legacy devices
•
ESD protected
2.1.9 SERIAL PORTS
•
2 full modem serial RS232 ports, 16C550 compatible
2010 by MPL AG
12
MEH-10126-201 Rev. D
High-Tech • Made in Switzerland
PIP20 / PIP22
Technical Reference Manual
