MPC 4000 GEN II SERIES LOCK BAR MECHANICAL PANEL CONTROL INSTALLATION AND OPERATION
90-891909001 AUGUST 2005
Page 5 / 26
IMPORTANT: Ensure that the remote control has adequate clearance and does not
contact other components. The cable path should be free of obstructions. See shaded
area.
(5.75 in.)
147 mm
(7.78 in.)
197.6 mm
(8.62 in.)
R 218.9 mm
(2.00 in.)
50.8 mm
69.9 mm
(2.75 in.)
353.1 mm
(13.9 in.)
303.3 mm
(11.94 in.)
17434
32.8 mm
(1.29 in.)
125.5 mm
(4.94 in.)
76.5 mm
(3.00 in.)
25.4 mm
(1.00 in.)
218.9 mm
(8.62 in.)
40.6 mm
(1.60 in.)
142.2 mm
(5.60 in.)
a
b
b
c
d
a -
Maximum mounting panel thickness
b -
If shift and throttle cables are not mounted in the same housing slot position,
do not use clamping straps ‑ an increase in shift and throttle load will be
noticed.
c -
Hand clearance
d -
Plus hand clearance