10.Operating washing machine
① Put the clothes to be washed into the washing bucket, and then put the appropriate amount of
detergent
② Pour in the right amount of water (water can completely cover the clothes, and about 3 ~ 5 cm
above the clothes is preferred)
③ Tap the “Washing” for 1 second and switch the required program with "di" sound. After selecting
the program, it will automatically enter the washing program without operation for 3 seconds
④ When the program is finished, the program's signal lamp will flash for 5 seconds and beep for
3 seconds at the same time. After 5 seconds, the signal lamp will be off and the program will be finished
⑤ Take out washing clothes
⑥ Disconnect the adapter from the machine and socket
⑦ Choose the right way to drain the water out of the washing machine
⑧ Wipe the machine
After washing
11.cleaning and maintenance
When the washing program is finished, please drain the dirty water from the washing machine,
avoiding standing for a long time to spoil the water
Need to carry out
Please wipe the machine clean and fold the washing machine as the folding method, and put the
cover on the bottom. Then place it into the accompanying cloth bag and place the matching adapter
Make sure the adapter is disconnected from the socket and machine before cleaning the parts
CAUTION
9.Usage (program settings)
The washing machine is set up with three programs: 5, 10, 15. Among them, 5, 10 and 15 represent
the washing time of 5 minutes, 10 minutes and 15 minutes respectively. Because the program is set
to complete the current washing process, it will extend the cooling time of the whole machine for 3
minutes, so the cycle working time of each program will be 3 minutes longer than the marked time.
Please understand.
Please choose the required procedure according to the amount of washing clothes and the degree
of dirt.
Program setup steps
Touch the button once, the first "5" program is on, then touch again and the second "10" program is
on. So loop operation can switch the program. When the desired program is selected, the machine
will automatically enter the selected program if there is no action in three seconds. When the program
is finished, the fan continues to work for 3 minutes, then the program lights shine for 5 seconds, and
the buzzer drops three times and the lights go out after 5 seconds. That is, the program runs.
Caution
During use, please be sure to power off after finishing the current washing program. Do not cutoff
power before the program is completed. (There is a fan arranged inside the machine to
dissipate heat from the motor. If the heat dissipation of the machine do not reach the designed
temperature drop range, it will continue to run the washing work, which is easy to cause
damage to the motor gear)
If the power is cut off before the program is completed, do not enter the new washing program
immediately, please standby for 10 minutes and then enter the next washing.
