2.Technical data
Nominal
Voltage
Rated
Frequency
Rated
Power
Level of
Noise
Working status
appearance dimension
Folding state
appearance size
Rated Washing
Capacity
180~240V~
50/60Hz
40W
0.8kg
292×292×290mm
292×292×96mm
≤60dB
3.Installation steps
The folding washing machines must be connected properly, or it will not work well
Water intake and drainage condition and electrical connections must conform to thefollowing or the
standards specified in the manual
Please remove the packing cases, bags and other packing materials of this machine. Count all items
according to the packing list. Each washing machine is tested before it goes out, so there will be a
small amount of water or water marks left inside the machine
Receiving inspection
The position should be away from heat source and avoid direct
sunlight to prevent shell coating from peeling or fading
Please unroll the washing machine first, and then place it on a stable level
Select installation position
① The first lower drainage method: After the machine is packaged,
the drain pipe at the bottom is arranged in Z shape on the base.
Place the drain port above the drainage position, and then pull
up the manual drain switch on the right side 80 degrees.
The machine will start to drain water
②The second lower drainage method:Pull the drain pipe on the base
along the outlet position, pull the drain pipe out of 3 buckles, pull it
straight along the drain pipe and put it into the groove for in-line
drainage. Then lay the machine down steadily. When the machine
wants to drain water, pull the manual drain switch on the right side
up to 80 degrees, and the machine starts to drain water
③The third upper drainage method:For the sake of emptying the
water inside the machine immediately, manual drainage is an option.
First power off the whole machine and disconnect the whole machine
from the adapter . Lift the handle of the machine with one hand and
buckle the other hand into the buckle hole of the base . Tilt the upper
mouth of the machine downward and empty the water gradually
Drain water away
For using the bottom of the machine for drainage , it may not be able to drain all the water
in a short time. Therefore, when using the lower drainage method, it is recommended to use
the upper drainage method to drain all the residual water after the completion of drainage
*Explanation: Due to the mini portability of the machine, small drainage pipe diameter and
slow drainage are normal. Please wait patiently
Drain
Drain
Drain
Take out the
drain pipe
and keep
it straight
Grab the handle with
the other hand
Lift the
bottom
Caution
It should be placed in an open
place as much as possible. Do
not place in a place that may be
frozen in winter (5 ° C)
Pull the drain
switch to
drain
① Pour clean water directly into the bucket of washing machine. The injected water level shall not
exceed the maximum level "H"
Flooding water
