Moyer Diebel nexus N900, Installation/Operation Manual With Service Replacement Parts

Page: 22 / 62

14
Operation
1. Close the door dishwasher front door.
2. Push the Power Switch UP to turn on power.
3. The power switch will illuminate and the machine will fill with water.
4. Wait until the wash temperature indicates a minimum of 150°F/66°C.
PLACE AN EMPTY DISH RACK IN MACHINE AND RUN FIRST CYCLE EMPTY TO HEAT
WASH TANK INTERIOR.
5. Load the dish rack into the machine. Wash one dish rack at a time.
6. Close the door and press the green start button for 1 second. The green in-cycle light will
illuminate and the cycle will begin.
8 The final rinse cycle begins at the end of the wash cycle. The machine drains and refills with
fresh hot water. The final rinse must indicate a minimum of 180-195°F/82-92°C.
9. Open the door and remove the wares when the green cycle light goes out.
NORMAL WASH MODE
Control Panel
LCD
ON/OFF- DRAIN
POWER SWITCH
Prime
Push Button
Start
Push Button
In Cycle
LED Light
Wait
LED Light
! ATTENTION !
RINSE SENTRY MODE WILL EXTEND WASH CYCLE TIME
In the event the final rinse temperature has not reached 180-195°F/82-92°C. After the
wash cycle, the rinse sentry will extend the wash cycle time until the booster reaches
180-195°F/82-92°C. If the proper temperature is not reached within 5 minutes, the
machine will leave the rinse sentry mode and complete the cycle.