Moyer Diebel nexus N900, Installation/Operation Manual With Service Replacement Parts

Page: 21 / 62

13
Priming the Chemical Dispensing Pumps
! VERY IMPORTANT !
The chemical dispensing pumps must be primed before operating the
dishwasher and whenever the container is changed.
Nexus Control Panel
1. The chemical dispensing pump supply lines must be primed
before the will pump properly.
2. Make sure the containers are full and the correct pick-up tubes
are in their containers.
3. Turn the dishwasher power switch ON. The switch illuminates
and the machine fills with water.
4. Open the dishwasher door, then push and hold the prime push
button, (Fig. 11), UP to the detergent position until detergent is
observed entering the wash compartment from the injection fitting
in the right rear of the tank. Release the button.
5. The rinse-aid pump will self-prime after several cycles.
ON
PRIME
Fig.10
Fig.11
Installation
! VERY IMPORTANT !
INSPECT AND REPLACE THE CHEMICAL DISPENSING PUMP
SQUEEZE TUBES EVERY SIX MONTHS.