16
FRAME PAD AND POLES ASSEMBLY
WARNING
!
Never use the trampoline without the Frame Pad, the Frame Pad reduces the
risk of getting injured by hitting the metal frame or springs. Inspect the Frame
Pad before each and every use to ensure all exposed metal parts are fully
covered by the Frame Pad!
Step 8 :
8A.
Align Frame Pad (parts 24 & 25) over the trampoline so that the springs and
steel frame are fully covered.
8B.
After the combination of Upper Enclosure Tubes (parts 7 & 8) with Lower
Enclosure Tubes (part 9), use the end with the larger opening of the Short sleeves
(part 33) to wear from the end of Short Upper Enclosure Tubes (part 8), and use
the end with the larger opening of the Long sleeve (
34) to wear from the end
of Long Upper Enclosure Tubes (part 7). After completion, assemble it to the main
frame tube. Use the exposed end of Lower Enclosure Tubes (part 9) to assemble,
as shown in the picture.
NOTE:
Make sure the frame pad is placed with the warning label beside a leg
frame so it will be aligned with the enclosure entrance.
