UC-8112-LX-STK Manual
Hardware Connection Description
3-7
Installing the Wi-Fi Module
Follow these steps to install the Wi-Fi Module to the UC-8112-LX computer.
1.
Remove the screws on the side panel, and take off the cover.
2.
Find the location of the PCIe socket. Insert the cellular module into the socket, and then tighten the screws
to fasten the socket.
3.
Use the two silver screws to fasten the stabilization bracket to the Wi-Fi module. Make sure you connect the
bracket in the correct direction. Insert the Wi-Fi module into the PCIe socket, and then fasten with the
bracket into place using the two black screws.
4.
Next you need to install the antenna cable. There are two antenna connectors on the Wi-Fi module. Connect
the cable onto either connector.
