ATTENTION
Safety First!
Observe all electrical codes dictating the maximum current
allowable for each wire size. If the current goes above the
maximum ratings, the wiring could overheat, causing serious
damage to your equipment.
Please read and follow these guidelines:
•
Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
NOTE: Do not run signal or communications wiring and power wiring
through the same wire conduit. To avoid interference, wires with different
You can us
type of si
nsmitted through a wire to
de
sh
is
th
si
bundled together.
•
Keep input wiring and ou
It i
t
stem
wh
Grounding the Tough
oun
ting h
electromagnetic interference
grounding screw to the groun
signal characteristics should be routed separately.
•
e the
termine which
gnal tra
ould be k
wires
at wiring that shares
ept separate. The rule of thumb
milar electrical characteristics can be
tput wiring separated.
you label wiring for all
•
s strongly advised tha
en necessary.
devices in the sy
Net Switch
Gr
ding and wire rou
elp limit the effects of noise due to
(EMI). Run the ground connection from the
ding surface prior to connecting devices.
ATTENTION
This product is in
mounting surface
tended to be mounted to a well-grounded
such as a metal panel.
- 11 -
