Moxa Technologies THINKCORE W311 User Manual Download Page 33

Page: 33 / 104

ThinkCore W311/321/341 Linux User’s Manual

Managing Embedded Linux

3-4

2. Type the following commands to use the W311/321/341’s built-in FTP client to transfer the

firmware file (W341

-x.x.x.frm

) from the PC to the W311/321/341:

/mnt/ramdisk> ftp <destination PC’s IP>

Login Name: xxxx

Login Password: xxxx

ftp> bin

ftp> get -x.x.x.frm

192.168.3.127 – PuTTY

root@Moxa:/mnt/ramdisk# ftp 192.168.3.193

Connected to 192.168.3.193 (192.168.3.193).

220 TYPSoft FTP Server 1.10 ready…

Name (192.168.3.193:root): root

331 Password required for root.

Password:

230 User root logged in.

Remote system type is UNIX.

Using binary mode to transfer files.

ftp> cd newsw

250 CWD command successful. “/C:/ftproot/newsw/” is current directory.

ftp> bin

200 Type set to I.

ftp> ls

200 Port command successful.

150 Opening data connection for directory list.

drw-rw-rw- 1 ftp ftp 0 Nov 30 10:03 .

-rw-rw-rw- 1 ftp ftp 13167772 Nov 29 10:24 w3xx-1.0.frm

226 Transfer complete.

ftp> get w3xx-1.0.frm

local: ia240-1.0.frm remote: w3xx-1.0.frm

200 Port command successful.

150 Opening data connection for w3xx-1.0.frm

226 Transfer complete.

13167772 bytes received in 2.17 secs (5925.8 kB/s)

ftp>

3. Next, use the

upfirm

command to upgrade the kernel and root file system:

#upfirm w3xx-x.x.x.frm

192.168.3.127 – PuTTY

root@Moxa:/mnt/ramdisk# upfirm w3xx-1.0.frm

Moxa ThinkCore IA240 upgrade firmware utility version 1.0.

To check source firmware file context.

The source firmware file conext is OK.

This step will destroy all your firmware.

Continue ? (Y/N) : Y

Now upgrade the file [kernel].

Format MTD device [/dev/mtd1] . . .

MTD device [/dev/mtd1] erase 128 Kibyte @ 1C0000 – 100% complete.

Wait to write file . . .

Compleleted 100%

Now upgrade the file [usrdisk].

Format MTD device [/dev/mtd2] . . .

MTD device [/dev/mtd2] erase 128 Kibyte @ 800000 – 100% complete.

Wait to write file . . .

Compleleted 100%

Upgrade the firmware is OK.

Summary of Contents for THINKCORE W311









































































































Search results

Summary of Contents for THINKCORE W311

Reviews:

Related manuals for THINKCORE W311

Brands by name

Popular brands

Moxa Technologies THINKCORE W311, User Manual

Search results

Summary of Contents for THINKCORE W311

Reviews:

Related manuals for THINKCORE W311

Brands by name

Popular brands