Moxa Technologies THINKCORE W311 User Manual Download | Manualshive

Page: 31 / 104

background image

ThinkCore W311/321/341 Linux User’s Manual

Managing Embedded Linux

3-2

System Version Information

To determine the hardware capability of your W311/321/341, and what kind of software functions
are supported, check the version numbers of your W311/321/341’s hardware, kernel, and user file
system. Contact Moxa to determine the hardware version. You will need the

Production S/N

(Serial number), which is located on the W311/321/341’s bottom label.

To check the kernel version, type:

#kversion

192.168.3.127 – PuTTY

root@Moxa:~# kversion
Version 1.0
root@Moxa:~#

NOTE

The kernel version number is for the factory default configuration. You may download the latest
firmware version from Moxa’s website and then upgrade the W311/321/341’s hardware.

System Image Backup

Upgrading the Firmware

The W311/321/341’s bios, kernel, and root file system are combined into one firmware file, which
can be downloaded from Moxa’s website (

www.moxa.com

). The name of the file has the form

w341-x.x.x.frm

, with “x.x.x” indicating the firmware version. To upgrade the firmware,

download the firmware file to a PC, and then transfer the file to the W311/321/341 using a console
port or Telnet console connection.

ATTENTION

Upgrading the firmware will erase all data on the Flash ROM

If you are using the

ramdisk

to store code for your applications, beware that updating the

firmware will erase all of the data on the Flash ROM. You should back up your application files
and data before updating the firmware.

«
...
29
30
31
32
33
...
»

Summary of Contents for THINKCORE W311









































































































Reviews:

No comments

Related manuals for THINKCORE W311

Brand: Paradyne Pages: 20

Compshere 3000 Series

Brand: Paradyne Pages: 2

Brand: Q-See Pages: 2

Brand: Freescale Semiconductor Pages: 921

Brand: Orban Pages: 255

SteelCentral NetExpress

Brand: Riverbed Pages: 38

Aquaduct 360 XT

Brand: Aqua Computer Pages: 28

ELC-LTTR240-TBP

Brand: ENERMAX Pages: 16

Brand: Qlogic Pages: 8

Brand: ZALMAN Pages: 5

RouterBOARD 411R

Brand: 4gon Pages: 2

Brand: Ubiquiti Pages: 13

VIGI NVR1004H-4P

Brand: TP-Link Pages: 2

LinkStation 500

Brand: Buffalo Pages: 139

HiGain Line Unit HLU-388

Brand: PairGain Pages: 7

Brand: Mitsubishi Pages: 188

Brand: YASKAWA Pages: 87

Brand: ZALMAN Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands