- 12 -
NOTE
When using a fiber optic small-form pluggable (SFP) module,
ensure it is a IEC 60825-1 certified and Class 1 Laser Product.
USB Storage Connection
The TAP-213 has one USB storage port (5-pin female M12 A-coded) on
the front panel. Use the Moxa ABC-02-USB-T automatic backup
configurator to connect to the TAP's USB storage port for configuration
backup, firmware upgrade, or system log file backup.
USB Storage Port Pinouts
Pin No.
Description
1
DN
2
VBUS
3
NC
4
DP
5
GND
USB Console Connection
The TAP-213 has one USB console port (5-pin female M12 B-coded)
located on the front panel. Use a B-coded USB-to-5-pin M12 male cable
to connect the TAP-213’s console port to your PC’s COM port. You may
then use a console terminal program to access the TAP-213 for console
configuration.
USB Console Port Pinouts
Pin No.
Description
1
DP
2
NC
3
GND
4
DN
5
NC
LED Indicators
The front panel of the TAP-213 contains several LED indicators. The
function of each LED is described in the table below:
LED
Color
State
Description
PWR
Green
On
Power is on
Off
Power is
not
being supplied
FAULT
Red
On
System is booting up
Blinking (slow
at 1-second
intervals)
Cannot get an IP address from
the DHCP server
Blinking
(fast at 0.5-
second
intervals)
IP address conflict
Off
No error condition exist
