Moxa Technologies PT-G503-PHR-PTP-HV, User Manual, Page: 28 / 47

PRP/HSR Redundancy Box Featured Functions
3-18
Entry Forget time (ms)
Setting Description Factory Default
10/100 Select 100 (ms) for 100M, and 10 (ms) for 1000M 10
Net ID (only available on the PT-G503-PHR-PTP series)
Setting Description Factory Default
1 to 7 Allows the user set a Net ID, ranging from 1 to 7 (Coupling
mode only) Auto
LAN ID
Setting Description Factory Default
A/B Allows the user to set a LAN ID (Coupling mode only) Auto
Multicast Filtering
The Moxa PRP/HSR RedBox provides a multicast filtering function. You can enable the source port and set it to
drop or forward ingress traffic that comes from the designated port with a specific multicast MAC address.
Action
Setting Description Factory Default
Drop/Forward The RedBox will drop or forward traffic, depending on the
setting Drop
Priority Index
Setting Description Factory Default
1 to 8 Items with priority 1 will be acted on first, followed by items
with priority 2, etc. 1
Source Port
Setting Description Factory Default
Interlink Port or A/B Multicast filtering applies to the source port None
MAC Address
Setting Description Factory Default
MAC Address Input the multicast MAC address None
Compared Length
Setting Description Factory Default
Bytes Between 1 and 6 bytes. The RedBox will compare the first x
bytes of ingress packet of the multicast MAC address. None