- 2 -
Overview
The OnCell G3150A-LTE is a reliable, secure, LTE gateway with
state-of-the-art global LTE module. This 4G cellular gateway provides a
more reliable connection to your Ethernet network for cellular
applications.
To enhance industrial reliability, the OnCell G3150A-LTE features isolated
power inputs, which together with high-level EMS and wide-temperature
support give the OnCell G3150A-LTE the highest level of device stability
for any rugged environment. In addition, with dual-SIM GuaranLink and
dual power inputs, the OnCell G3150A-LTE supports network redundancy
to ensure uninterrupted connectivity.
The OnCell G3150A-LTE also comes with a 3-in-1 serial port for serial over
LTE cellular network communication. Use the OnCell G3150A-LTE to
collect data and exchange data with serial/Ethernet devices.
Package Checklist
Moxa’s OnCell G3150A-LTE is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.
•
1 OnCell G3150A-LTE unit
•
2 2G/3G/4G antennas 2 dBi omni-directional with SMA male
connectors
•
1 DIN-rail mounting kit
•
Quick installation guide (printed)
•
Warranty card
Installation and Configuration
Before installing the OnCell G3150A-LTE, make sure that all items in the
package checklist are in the box. In addition, you will need access to a
notebook computer or PC equipped with an Ethernet port. The OnCell
G3150A-LTE has a default IP address that you must use when connecting
to the device for the first time.
Take the following steps to configure your OnCell G3150A-LTE. Refer to
the Panel Layout of the OnCell G3150A-LTE section below for the location
of the ports and sockets.
Step 1: Insert a SIM card and turn on the OnCell G3150A-LTE
1.
Use a screwdriver to loosen the screws and remove the SIM card
cover.
2.
Insert one or two 2G/3G/4G SIM cards (full-sized SIM/1FF) into the
SIM card slots located on the bottom of the OnCell G3150A-LTE.
If you are only using one SIM card, insert it in the top slot (slot 1; the
card in slot 1 is referred to as SIM1).
By default, the SIM card in the slot 1 is treated as the primary card.
To change the default to SIM2 (the card in slot 2), log in to the
OnCell’s web UI, and configure SIM2 as the primary card. When the
OnCell device is turned on, it boots up based on the configuration
information stored on the primary SIM card.
3.
Turn on the OnCell G3150A-LTE by connecting a power terminal
block to a DC power source (12 to 48 VDC). For details refer to the
Connecting the Power Input section.
4.
Reattach the cover.