NPort 5000 Series User Manual
125
Deleting a COM Group
Follow the steps below to delete a COM Group and then auto-assign COM numbers for each port in the
Group:
1.
Select all serial ports in the Group you are deleting and then right-click to select
COM Settings
.
2.
Select a COM number for this COM group and check the
Auto enumerating COM number for
selected ports
to use the COM number you select as the first starting COM number, and then click
OK
.
3.
You will be able to view the serial ports that were assigned to and removed from the Group. Click
Apply
to apply the settings.