MGate 5105-MB-EIP
Quick Configuration Guide
2-9
NOTE
When the MGate gateway acts as an EtherNet/IP adapter, the O
T instance is 100 and T
O instance is 110.
Your EtherNet/IP scanner (e.g. PLC, SCADA) needs to use these two instances to communicate with the MGate.
For example, you should provide an Output (i.e., O
T) instance of 100 and an Input (i.e., T
O) instance of 110
for a Rockwell PLC, as shown below.
I/O Data View
I/O Data View is designed to check all I/O modules’ exchanging data. Select data flow directions to obtain the
correct data from Modbus or EtherNet/IP packets.
