ioLogik R2110 Series User’s Manual
Configuring with ioAdmin
3-17
3. Modbus address table
-----------------------
Channel No.
I/O type Modbus reference Modbus address (Dec, Hex)
DI00 Input 10001 0000,
0x0000
DI01 Input 10002 0001,
0x0001
DI02 Input 10003 0002,
0x0002
DI03 Input 10004 0003,
0x0003
DI04 Input 10005 0004,
0x0004
DI05 Input 10006 0005,
0x0005
DI06 Input 10007 0006,
0x0006
DI07 Input 10008 0007,
0x0007
DI08 Input 10009 0008,
0x0008
DI09 Input 10010 0009,
0x0009
DI10 Input 10011 0010,
0x000A
DI11 Input 10012 0011,
0x000B
DO00 Output
00001 0000,
0x0000
DO01 Output
00002 0001,
0x0001
DO02 Output
00003 0002,
0x0002
DO03 Output
00004 0003,
0x0003
DO04 Output
00005 0004,
0x0004
DO05 Output
00006 0005,
0x0005
DO06 Output
00007 0006,
0x0006
DO07 Output
00008 0007,
0x0007
<END>
Password Protection
The ioLogik R2110 can be protected by password under the Management tab. The login and
password restrict access to configuration and other functions, such as Host Connection Watchdog
or firmware updates. If you forget the password, press
Reset
to clear the password and reset all
settings back to their factory defaults.
NOTE:
The Reset button is located at the top of the ioLogik R2110. Hold the reset button down for
5 seconds to reboot the system back to factory defaults.
Firmware Update
Once you have logged in under the Management tab, you can use ioAdmin to remotely download
firmware for the ioLogik R2110. You can download the newest firmware at Moxa's website. The
file name of the firmware will be in this format:
XXXX
.2kp.
