- 5 -
DIN-Rail Mounting
The metal DIN-rail kit is fixed to the back panel of the EDS-P506E-4PoE
Series when you take it out of the box. Mount the EDS-P506E-4PoE Series
on corrosion-free mounting rails that meet the EN 60715 standard.
Installation
STEP 1—
Insert the upper lip
of the DIN rail into the DIN-rail
mounting kit.
STEP 2—
Press the
EDS-P506E-4PoE Series
towards the DIN rail until it
snaps into place.
Removal
STEP 1
—Pull down the latch
on the mounting kit with a
screwdriver.
STEP 2 & 3
—Slightly pull the
EDS-P506E-4PoE Series
forward and lift up to remove
it from the DIN rail.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount the
EDS-P506E-4PoE Series on a wall (in an enclosure or industrial panel), as
shown in the following illustrations:
STEP 1—
Remove the
aluminum DIN rail attachment
plate from the rear panel of
the EDS-P506E-4PoE Series,
and then attach the wall
mount plates with M3 screws,
as shown in the figure at the
right.
