- 11 -
ATTENTION
This is a Class 1 Laser/LED product. To avoid causing serious
damage to your eyes, do not stare directly into the Laser Beam.
LED Indicators
The front panel of the Moxa EtherDevice Router contains several LED
indicators. The function of each LED is described in the following table:
LED
Color
State
Description
PWR1
AMBER
On
Power is being supplied to power input
P1 on the main module.
Off
Power is
not
being supplied to power
input P1 on the main module.
PWR2
AMBER
On
Power is being supplied to power input
P2 on the main module.
Off
Power is
not
being supplied to power
input P2 on the main module.
FAULT
RED
On
When a user-configured event is
triggered.
Off
When a user-configured event has not
been triggered.
10/100/
1000M
AMBER
On
TP or FX port’s 10/100 Mbps link is
active.
Blinking
Data is being transmitted at 10/100
Mbps.
Off
TP or FX port’s 10/100 Mbps link is
inactive.
GREEN
On
TP or FX port’s 1000 Mbps link is
active.
Blinking
Data is being transmitted at 1000
Mbps.
Off
TP or FX port’s 1000 Mbps link is
inactive.
WAN/DMZ
(EDR-G903
only)
AMBER
On
The WAN2/DMZ port is set to the
“WAN” function.
Off
The WAN2/DMZ port is disabled.
GREEN
On
The WAN2/DMZ port is set to the
“DMZ” function.
Off
The WAN2/DMZ port is disabled.
VPN
GREEN
On
The EDR-G900 is working with
IPsec/OpenVPN tunnels.
Off
The EDR-G900 is not working with any
IPsec/OpenVPN tunnel.
VRRP.M
GREEN
On
The EDR-G900 is Master of VRRP.
Off
The EDR-G900 is not Master of VRRP.