3-28
Industio CP-132 Series User’s Manual
Loading Driver
Having completed the setup, you can load the driver,
"BIN\DP-DRV.EXE"
, at the
DOS prompt. The driver will detect the
Industio
CP-132 Series board automatically.
If the board(s) is(are) detected, a message similar to below will show:
Smartio/Industio Family DOS driver Version 1.1
Setup driver….
CP-132 series (Bus=0, Dev=14): O.K.!
Device driver setup O.K.
It means the
Industio
CP-132 Series driver is installed properly. At this point, you
are ready to execute application that supports API-232 functions, or start developing
applications using API-232 library.
If something went wrong, for instance, the board does not match the configuration or
the board is missing, the screen will show a message like:
Smartio/Industio Family DOS driver Version 1.1
Setup driver….
CP-132 series (Bus=0, Dev=14): Board not Found.!
Setup none port !!
It means the
Industio
CP-132 Series driver is not installed properly. Please refer to
chapter, “Troubleshooting”, for possible reasons and solutions.
Unloading Driver
To unload (release) the
Industio
CP-132 Series driver from memory, type "
DP-DRV/Q"
at
the DOS prompt.
