AWK-3131A-RTG UM
Web Console Configuration
3-29
Port PVID
Setting
Description
Factory Default
VLAN ID ranging from 1
to 4094
Set the port’s VLAN ID for devices that connect to the port. The
port can be a LAN port or WLAN ports.
1
VLAN Tagged
Setting
Description
Factory Default
A comma-separated list
of VLAN IDs. Each of
the VLAN IDs range
from 1 to 4094. For
example: 1,2,3,4.
Specify which VLANs can communicate with this specific VLAN. (Empty)
NOTE
The VLAN feature can allow wireless clients to manage the AP. If the VLAN Management ID matches a VLAN
ID, then those wireless clients who are members of that VLAN will have AP management access.
CAUTION: Once a VLAN Management ID is configured and is equivalent to one of the VLAN IDs on the AP, all
members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.
DHCP Server
DHCP (Dynamic Host Configuration Protocol) is a networking protocol that allows administrators to assign
temporary IP addresses to network computers by “leasing” an IP address to a user for a limited amount of time,
instead of assigning permanent IP addresses.
The AWK-3131A-RTG can act as a simplified DHCP server and easily assign IP addresses to your DHCP clients
by responding to the DHCP requests from the client ends. The IP-related parameters you set on this page will
also be sent to the client.
You can also assign a static IP address to a specific client by entering its MAC address. The AWK-3131A-RTG
provides a
Static DHCP mapping
list with up to 16 entities. Be reminded to check the
Active
check box for
each entity to activate the setting.