-
6
-
WARNING
•
This equipment is intended to be used in a Restricted
Access Location, such as a dedicated computer room where
access can only be gained by SERVICE PERSONS or by
USERS who have been instructed about the fact that the
metal chassis of the equipment is extremely hot and may
cause burns.
•
Access to the equipment should be controlled through the
use of a lock and key or a security identification
system,
controlled by the authority responsible for the location.
Only authorized, well-trained professionals should be
allowed to access the restricted access location.
•
Service persons or users must pay special attention and
take special precautions before handling this equipment.
External Metal Parts are Hot!
•
Use adequate protection before handling this device.
STEP 2:
Insert the top of the DIN rail into
the slot just below the stiff metal
spring.
STEP 3:
The DIN-rail attachment unit will
snap into place as shown in the
figure below:
To remove the
AWK-3121B f
rom the DIN rail, simply reverse Steps 2
and 3.
M4 screws specification
for
DIN-Rail
Mounting Kit
: