Moxa Technologies AWK-3121B Series Quick Installation Manual Download Page 12

Page: 12 / 14

- 1

Protocol Support

General Protocols

Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, DHCP

AP-only Protocols

ARP, BOOTP, DHCP

Interface

Connector for
External Antennas

N-type (female)

Fiber Ports

1, 100/1000Base SFP slot

LAN Ports

1, M12-type, 8-pin female X-coded,
10/100/1000BaseT(X) auto negotiation speed,
F/H duplex mode, and auto MDI/MDI-X
connection

Console Port

RJ45

connector for

RS-232 serial

console

Reset

Present
PWR, FAULT, STATE, WLAN, LAN 1, LAN 2

Physical Characteristics

Housing

Metal

Weight

2.0

Professional installation

This is a specific product that requires professional installation and configuration, must

be performed by trained technical engineers to install the antenna, please contact

Moxa for further information.

The availability of some specific channels and / or operational frequency bands are

country dependent and are firmware programmed at factory to match the intended

destination. The firmware setting is not accessible by the end user.

Summary of Contents for AWK-3121B Series














Search results

Summary of Contents for AWK-3121B Series

Reviews:

Moxa Technologies AWK-3121B Series, Quick Installation Manual, Page: 12 / 14

Search results

Summary of Contents for AWK-3121B Series

Reviews: