Movon MDAS-3LF, Installation Manual

Page: 15 / 44

- 15 -
Color Label
Connection Description
White CAN H To CAN High wire
Support CAN J1939
standard, CAN 2.0 (Support
Version A, B)
Green CAN L To CAN Low wire
Yellow POWER To constant power wire
Support 12~24 V (MAX 36V)
Red ACC
To ignition (Accessory) power
wire that turns off when key is at
OFF
Black GND
To ground source, please ensure that is connected properly to
ground, or it could damage the vehicle and MDAS.
*Note : Connect Power cable and IGN cable together to ignition (Accessory)
power.
3.3.2 4Pin Analog Cable
Color Label Connection Description
Blue Sig R To analog right turn signal
Blue/White Sig L To analog left turn signal
Brown/White Speed
To analog speed signal, be careful about old vehicles
that do not have speed sensor,
Purple/White Auxiliary
Auxiliary wire sends out power, this can be used to
activate Vibrator module (Optional) and if need to use,
it has to be enabled in Calibration.