3
●
P
ro
d
u
c
t I
n
fo
rm
a
tio
n
●
Product Information
●
Outline
STAR SHOOTER is a do-it-yourself mechanical kit to make a wheel drive machine with three
motors, operated by a wired controller.
The moving features of STAR SHOOTER are: forward, backward, right and left turns, made by
its controller. The third motor is used to catch and shoot a ball.
Test and develop your skills to make the robot more enjoyable.
●
Specifications
Power Source / ”AA” alkaline battery X 4 pcs
(not included)
Power Consumption / Maximum. approx. 900mA
(when all 3 motors operating)
Approx. Average 550mA
Battery Duration / Approx. 2.5 hours
(continuous operation average )
Size / Body : W 130 X H 77 X D 120 (mm)
(projection not included)
Controller : W 95 X H 126 X D 31 (mm)
Wire : 2m
STAR SHOOTER MR- 9001E
Certain technical terms are used in this instruction
manual due to give you specific knowledge about
electronics and mechanics, which will help you to
understand other technical texts in the future.
CAUTION
◆
P ay attention to the following instructions for the use of batteries.
1. Place the batteries in the correct polarity (+ & -).
2. Never short-circuit, dismantle, heat the batteries, or dispose of them in a fire. They may leak
or explode and cause injury.
3. When you finish playing, remove the battery. Exhausted batteries are to be removed from
the product.
4. Do not wet the batteries or battery holder. If they get wet, remove the batteries from the hold-
er and wipe them off thoroughly.
5. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or recharge-
able (nickel-cadmium) batteries. Do not use the rechargeable batteries. Use only the bat-
teries of the same types as recommended.
【
Colored example
】
* To color the machine, carefully read the
"
④
Coloring contest" on page 23 beforehand.
