movistar Home Station ADSL, Installation Manual, Page: 5 / 20

4. Switch on the router
Power on the router “Home Station ADSL” by pressing the switch in the back side to the ON
position. Wait a few minutes until the LEDs stay green as in the table below:
Light Current status Description
Power Static green
Lit when there is power supply.
(If it’s red, wait until startup is finished).
Ethernet Off Status of the cabled connection (Ethernet).
Wifi Static green Status of the wireless connection (Wifi).
WPS Static green Easy mode for wireless connection with computer (WPS).
3G Off
USB port status.
ADSL Static green
Connection established with the exchange.
(It blinks while still trying to connect)
Internet Static green
There is available one IP address to surf Internet.
(When blinking in red, wait until the firmware upgrade finishes).
The routers provided by Movistar are optimized so they can establish the connection
with Internet without any need for installations or configurations.
Movistar can make a remote update of your equipment to offer you a better service, specially in
the initial installation. During this update process the internet indicator (first one of the right) will
blink in green and red.
Warning : don’t turn off your router “Home Station ADSL” while upgrading in progress
because it can result in damaged equipment.
5
Further information on section 3.4 of user’s guide on the documentation CD ( 7 ).