Movisens Move II, User Manual

Page: 20 / 30

16
At the end of the measurement the LED stops flashing.
!
! !
!
If you reconnect the sensor after starting a measurement
again with a PC, the measurement will be stopped
prematurely.
!
! !
!
If you connect the sensor to an USB charger, the
measurement won’t be stopped. That means you can
extend the measurement duration by intermediately
charging the sensor during a measurement.
7.4 Attaching the Sensor to the test
person
Depending on your sensor variant attach the sensor to one of the
following locations:
Use the Clip to attach the sensor to the right side hip. The
clip can be used with belts or directly on other garments.
The movisens logo should face directly to the right.
Use the wrist band to attach the sensor to the non-dominant
hand of the test person. At this position only simple
parameters like Movement Acceleration can be measured.