Movisens Move II, User Manual

Page: 17 / 30

13
7
7 Handling
This chapter describes how to prepare a measurement and how to
attach the sensor to a test person. Furthermore you get information
to save, delete and analyze data from the sensor.
7.1 Charging the Sensor
Step 1 : Connect the Sensor to a USB port (USB port of your
computer or another port that conforms to USB standard like USB
hub or USB charger).
After connecting the sensor to a USB port, the charging process
starts immediately. During charging, the status LED is blinking
blue. If the sensor is fully charged, the LED is blinking green.
7.2 Preparing a measurement
Before conducting a measurement please make sure you installed
the software as described in chapter 6.1.
Step 1: Start the movisens SensorManager by selecting Windows
Startmenu movisens SensorManager SensorManager
SensorManager is now searching for available sensors.
Step 2: Connect the Move II sensor with your PC using.
The software will automatically detect the device and open the
following window: