Movisens LightMove 3 10150, User Manual

Page: 28 / 48

24
When recharging the sensor you have to ensure that the battery is
fully charged (until the sensor is blinking yellow).
!
To be sure that the sensor is not running out of battery,
you must advise the test persons to recharge the sensor
every day until it is blinking yellow. The time for
daily
recharging the sensor is about 15 minutes .
If you recharge the sensor regularly you can make a measurement
up to the 2 month maximum recording capacity of the sensor.
If the sensor runs out of battery lifetime during a long measurement,
the recording of data will be stopped. The measurement won’t be
continued even if you connect it to a charger.
If the sensor is discharged completely (e.g. after a long period where
it was not used), it can take up to several minutes until the sensor
reacts and can be identified by the computer.
You can control the battery status before the measurement with the
sensor manager, see the following section.
Tip:
If the sensor should be recharged by the
test person, you can define a regular time
(e.g. during night or during taking a
shower in the morning) when they can
plug the sensor to a USB charger.