Movisens EdaMove 3, User Manual

Page: 47 / 60

41
7
You can now directly show the stored data. The measurement
will be opened in the
UnisensViewer . If you have installed the
DataAnalyzer you can directly start data analysis and generate
reports by clicking on “Analyze data”. You can find more
information in the DataAnalyzer User Manual.
7.7 Viewing Measurement Data
To view recorded measurements click o n “ Show data ” directly
after storing the data.
To view previously stored measurements use Windows Explorer
to navigate to your measurements folder and then open the
folder with the desired ID. Then double click on the
“unisens.xml” file. The measurement will then be shown in the
UnisensViewer :
Tip:
Directly after storing the data you
should check if the measurement is
complete and correct. You can check
visually if all signals are recorded for
the full measurement duration and if
the signals are of high quality.