8
The Fortress Power Scooter 1700 three and four wheel scooters have been designed to be disassembled and reassembled
quickly, easily, and without the use of tools. Should you have any difficulty during either the assembly or disassembly
procedures, please recheck the instructions and try again.
DISASSEMBLY PROCEDURE
Release the seat mechanism and lift the seat off the scooter. It is recommended to fold the backrest completely forward to
assist with handling of the Captain Seat.
Remove the battery cover by releasing the Velcro on each side
of the floor pan.
Remove the rear shroud by pulling outward on the back side of the
shroud to clear the positioning tab.
Unplug the rear shroud lights from the scooter before removing the
cover.
Disconnect the following connectors from the controller box.: Both battery
connectors (marked in red), the light package connector (marked in yellow),
and the charger connector located on the side of the controller box (marked
in red, white and black).
NOTE:
These connectors have a safety-latching feature to prevent
accidental disconnection. Press on each side of the connector to release the latch before pulling.
DISASSEMBLING / ASSEMBLING YOUR FORTRESS 1700 SERIES SCOOTER
NOTE:
Ensure the power is off before disassembly or re -assembly of your scooter.
