movinglife ATTO, Owner'S Manual

Page: 50 / 98

Tiller Angle Adjustment
REQUIRES TOOLS
The tiller angle adjustment must be performed
by certified technicians only, to prevent injury
and damage.
The tiller (steering rod) angle can be adjusted in
one of two positions according to user comfort. The
default position will be adequate for most users,
while larger users may want the tiller positioned
further away from their body to provide more
space. For smaller users, the tiller can be
positioned closer using special parts (ask your local
dealer). You will require a 4 mm Allen wrench (hex
key) to adjust the angle.
1. Your ATTO must be in an open position to
adjust the tiller angle. Once opened, locate and
release the two Allen (hex) screws (see
highlighted in red in Figure 26). Make sure you
keep holding the tiller in an upright position
(you must hold the tiller to prevent it from falling
while releasing the screws).
2. Move the tiller into the desired position and
tighten the two screws back again using a
thread-locker (such as Loctite).
Figure 26 Tiller angle adjustment screws