movinglife ATTO, Owner'S Manual

Page: 32 / 98

Damaged Labels
In case labels are unreadable for any reason,
please consult this section and contact Movinglife
for a new set of labels.
Compliance and Warning
Labels
The ATTO Mobility Scooter system components
are equipped with various product compliance
labels and icons. These are strategically
positioned to provide important information
regarding safe operation of the system.
For a description of the labels and symbols used
as well as details of their location, refer to the
following:
● Safety Rating and Manufacturer
Identification Label on page 29.
● Warnings and Cautions on page 15.
Additional labels used on system controls,
accessories and disposables are illustrated and
described in the following section:
● Labels on ATTO Mobility Scooter
Controls on page 29.
EMC Information
It is very important that you read this
information regarding the possible effects of
electromagnetic interference on your ATTO.
Electromagnetic Interference (EMI)
from Radio Wave Sources
Mobility scooters may be susceptible to
electromagnetic interference (EMI), which is
interfering electromagnetic energy (EM) emitted
from sources such as radio stations, TV stations,
amateur radio (HAM) transmitters, two-way
radios, and cellular phones. The interference
(from radio wave sources) can cause the mobility
scooter to release its brakes, move by itself, or
move in unintended directions. It can also
permanently damage the mobility scooter control
system. The intensity of the interfering EM energy
can be measured in volts per meter (V/m).
Each mobility scooter can resist EMI up to a
certain intensity. This is called the "EMI immunity
level". The higher the EMI immunity level, the
greater the protection from EMI. Currently the
ATTO technology has an immunity level of at
NOTE