26
7.
7.
7.
7.
Working with the Movexx
Working with the Movexx
Working with the Movexx
Working with the Movexx T1000
T1000
T1000
T1000-
-
-
-D
D
D
D
7.1
Attach/Link up
Stand in front of the Movexx T1000-D so that you face the machine. Take the Movexx
T1000-D by the handles and lift it up so that the coupling piece is pushed under the roll
container.
Drive to the front till the coupling piece has come under the edge of the trolley/container.
Push the machine down till the coupling piece and the trolley/container interlock with each
other.
The caster wheel will now be approximate 5 cm above the ground (see fig.5b). If this is not
the case, you need to adjust the coupling piece as described in point 6.5)
Let the Movexx T1000-D drag the container out of his position and place yourself in the
driving position (see chapter.7.2)
7.2
Driving with the Movexx T1000-D
Before operating the Movexx T1000-D consult the conditions in chapter 3 once more
concerning people, obstacles, etc.
When operating the Movexx from point A to point B the operator should take the following
position;
Stay on the side of the adze head with your face turned away from the Movexx T1000-D and
the container. This is the transport position. Keep enough distance from the container and
the Movexx T1000-D so that you won’t get stuck with any parts of your body.
The Movexx T1000-D may only be operated over flat and rising slopes in a pulling
position (see fig. 7a en b)
