25
Movex Innovation Inc.
OPERATING INSTRUCTIONS
D
ESCENDING STAIRS WITH A LOAD
** NEVER STAND BELOW THE TRACK-O AND ITS LOAD. IF THE LOAD WERE TO FALL YOU
COULD BE SEVERELY OR MORTALLY INJURED.**
1.
Position the TRACK-O on the landing so that the «Rear-end» of the TRACK-O is
pointing toward the bottom of the staircase or inclined surface. In other words, the
TRACK-O descends moving backwards (the «Rear-end» first).
2.
Maintain a safe distance between the TRACK-O and the top of the staircase or
inclined surface.
3.
Double check that the load is securely fastened.
4.
Position the TRACK-O so it is aligned with and parallel to the centreline of the
inclined surface.
5.
Always remain in a position above the TRACK-O and its load.
6.
Lower the «Leverage Arm» until it is practically horizontal.
P
OSITIONING OF
T
RACK
-O
TO DESCEND STAIRS
7.
Allow the back end of the TRACK-O to move over the top of the staircase or inclined
surface by pressing the
button until the center of the TRACK-O is teetering
over the edge (it is in a position of equilibrium on the top of the stairway). At this
point, STOP the TRACK-O.
8.
Pull up lightly on the «Leverage Arm» so that the TRACK-O tips or “rocks” down onto
the top steps. The rubber track should be resting on the top steps. The Rear-end of
the TRACK-O will be hanging over the top of the stairs.
9.
Begin the descending movement by pressing the
button.
10.
Halfway down the flight of stairs or down the inclined surface, STOP the TRACK-O.
11.
While remaining in a safe position above the device, raise the «Leverage Arm» so
that it will not hit the steps when the TRACK-O reaches the bottom of the stairs or
an inclined surface.
12.
Resume the slow downward progression with caution.
