background image

4

Manual

MOVEX ME 

EX

2.5 General warnings and  

information

The product must not be modified.
The product may only be used in perfect 
technical condition and according to its  
intended use as described in Section 

3.3 

Area of use

. Faults that may compromise 

safety must be rectified immediately.
The product’s moving parts always constitute  
a risk (e.g. cutting, clamping or gripping points).
The product is not intended for the extrac-
tion of non-conductive dust with an MIE 
(Minimum Ignition Energy) of less than 4 mJ.
The product must not be used in environ-
ments containing substances that can affect 
or react with the materials from which it is 
made. See 

10.1 Technical data

.

The earth cable must be connected to the 
appropriate earthing point.
The earth cable resistance must not exceed 

10 Ω.

For maintenance work where contact with 
dust occurs, personal protective equipment 
such as safety glasses, respiratory protection 
and safety gloves must be worn.

The product should only be used by personnel 
with good knowledge of the product and its 
area of use.
Please note that the facility owner is  
responsible for the classification and zoning 
of the workplace.
Waste disposal must be carried out in  
accordance with applicable national legislation.

2 Safety

2.1 General

This product is safe to use and designed to minimize 
any potential risks. Even so, if the product is not used 
correctly or as intended, it may be hazardous to the 
user or cause damage to the product. The user should 
therefore be informed and trained to handle the pro-
duct’s safety features.

2.2 Warning levels (on product)

Safety signs on Fumex products make use of colour 
codes and signal words in accordance with ISO 3864-2.

Red (DANGER)

: used to indicate 

an imminently dangerous situation 
which, if not avoided, will result in 
death or serious personal injury.

Orange (WARNING)

: used to indicate  

a potentially dangerous situation 
which, if not avoided, may result in 
death or serious personal injury.

Yellow (CAUTION)

: used to indicate a 

potentially dangerous situation which, 
if not avoided, may result in moderate 
or minor personal injury.

2.3 Safety signs

Refer t

3.2 Labels and safety signs.

2.4 Protective equipment

As the extraction arm is earthed, electrostatic discharge 
can be experienced when touching the product.
People can become electrostatically charged either 
directly (friction from clothes or shoes) or by induc-
tion (proximity to highly charged objects). Electrostatic 
charges can be produced when a person walks across a 
floor with a high resistance. This can usually be preven-
ted with the use of floor coverings with a resistance to 

earth of less than 100 MΩ and the use of electrostatic 

dissipative shoes.

Summary of Contents for ME EX





















Reviews: