Movacolor MIX BH, Manual

Page: 10 / 16

10
Mixer manual
8 Maintenance
Periodically check
Before performing any maintenance, be sure the device is disconnected from mains power
The mixer is equipped with moving parts which can show wear. It is advised to check the following points
each 6 months:
•
Check the mixer blades for wear.
•
Check the mixer axle gasket for leakage
•
Check mixer axle for clearance
Spare parts
Item Description Order code
1
Mixer blade, welded assembly.
MIXERAX
2
Mixer motor with de-airing and viton seal. Suitable for 400V/50Hz. MIX0HEAT
Mixer motor with de-airing and viton seal. Suitable for 440V/60Hz. MIX0HEAT/440
Mixer motor with de-airing and viton seal. Suitable for 480V/60Hz. MIX0HEAT/480
3
Oliekeerring 25x35x7 Viton MIX/SEAL
4
Bolt to fasten mixer blade + locking ring MIXSPIERING
Options
Optional a motor start stop system can be connected to the MIX50 or MIX100
With this start/stop system the mixer motor can be activated during material dosing only.
Item Description Order code
1
Start/stop mechanism for mixer, when applied mixer is
synchronized to the dosing unit and only runs when material is
dosed. MIX-STST