Movacolor MC-BALANCE, User Manual

Page: 10 / 49

MC-Balance manual 7
All Movacolor dosing units are standard equipped with the stepper motor 2A (LT), in case of using
the feed screw A30 the stepper motor 4,5A (HT) will be supplied. Also a screw A20 can be
connected to the HT motor.
Do not select the HT motor if LT motor is connected. This will damage the motor.
If LT motor is selected and HT motor is connected there will be less motor torque and this can
influence the dosing.
The controller of the dosing unit makes a distinction between two groups of materials, normal
granules and micro granules. To determine the kind of material in your application use the
description below.
* For other sizes contact Movacolor.
The actual capacity of the dosing system depends on:
•
The volume weight of the material
(bulk density)
•
The specific weight of the material
(specific density)
•
The granular shape of the material
•
The granule size
•
The surface structure of the material
Granular material can be normal or micro. The granular material and powder material has to be
free flowing, non-static and not sticky.
Stepper motor 2A
(LT)
Stepper motor 4,5A
(HT)
Normal Granules:
(NG)
Micro / Mini Granules:
(MG)
The term Micro/Mini Granules also
includes free flowing powder.
Ø
< 4 mm L < 4 mm *
Ø
< ø2,5 mm L < 3 mm *
L
ø
L
ø
Material types