MTWD (Digital Wrench) Operating Instructions
Rev 1.0 (3/29/2012)
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Low Battery
When battery capacity reaches a level with only 30% power left,
the battery icon on the display will flash. The digital torque wrench
is still workable but you should replace the battery soon.
When battery capacity reaches a level with only 10% power left,
the display will show the battery icon ONLY. The digital torque
wrench will no longer operate. Replace the battery immediately.
Digital Display & Functional Panel
Power On
To power on the wrench: Press any key for 3 seconds.
Note!
It may damage the wrench if you turn it on while
applying torque.
Power Off
1. Automatic: Without applying torque, the wrench automatically
shuts off after 90 seconds when the display indicates “0”.
2. Manual: Without applying torque, press CLR button for
5 seconds.
Switch Units
1.Press UNI button to select the torque measurement unit.
2. There are 4 torque units to select: N.m, lbf.ft, lbf.in, kgf.m
Page 2
